Contact Sales for ordering, options and ancillaries.Our UTFC range of universal tube furnaces can be used in a vertical or horizontal position and have three separate heating zones to ensure good uniformity across the work piece. They are often used by laboratories for tensile testing of materials, as creep-test furnaces or stress rupture test furnaces. In most cases they are suitable for replacing units of other makes, such as Mayes, Dennison, etc.
On the side of the casing is a terminal box for connecting to the elements and earthing the unit. Most models have a small tube for a thermocouple embedded in the heating elements for over-temperature protection (which when used with the proper equipment ensures the elements don't over-heat). Therefore the units can last much longer and are less likely to fail during a test. The units have either three or four M10 threaded mounted rods on a PCD of 203mm ±3mm.
There is a choice of 4 standard models, these include 3 tube diameters and 3 lengths. Control systems are sold separately, please see the datasheet below or contact us for more details.
Max Continuous Temperature: 1000°C
Max Short Term Temperature: 1100°C (element over-temperature protection system is recommended)
Supply Voltage: 220-240Vac 50Hz (via a suitable control unit, ordered separately)
Tensile Test Furnaces Datasheet Tensile Test Furnace Control Systems DatasheetAppearance will vary depending on model. UTFC1 shown.We may also be able to offer new units to manufactured customers' specifcations, please contact us for more details. 
TMS Europe Ltd is a UKAS accredited calibration laboratory No.0461, as defined in our Schedule of Accreditation. As a UK manufacturer we're a member of Made in Britain.