Eurotherm Code: 3208/CC/VH/LRRX/X/XXX/G/ENG/ENG
The Eurotherm 3208 controller offers precision control of temperature and other process variables together with a host of advanced features not normally found in this class of controller.
The emphasis is on simplicity and ease of use. A simple 'QuickStart' code can be used to configure all the functions essential for controlling your process. This includes input sensor type, measurement range, control options and alarms - making 'Out of the Box' operation truly achievable. In operator mode every parameter has a scrolling text message describing its function.
The controller can have up to 4 software alarms, which include absolute high & low, deviation high, low or band & rate of change, that are auto or manual latching, non-latching or event only, and up to four conditions can be assigned to one output.
An internal timer is configurable as an interval timer or delay timer; for example it can dwell when the setpoint is reached or provide a soft start for hot runner control.
The Contact Input or Digital Input can function as alarm acknowledge, SP2 select, manual, keylock, timer functions, standby select, RSP select.
- Easy, comprehensive operator information.
- 4 Alarms.
- Internal Timer.
- IP65 (NEMA 4X) rated front panel.
- Scrolling text messages*
- Modbus comms
- Modbus SP retransmission
- Help text
Thermocouple, RTD, Linear milliamps, Linear volts, millivolts, Contact Input (instead of Logic output)
Thermocouple: Type B, C, J, K, L, N, R, S, T
RTD: 2 or 3-wire PT100
Linera milliamps: 0 - 20mA, 4 -20mA - by fitting 2.49 Ohm external shunt (supplied)
Linear Volts: 0 - 10V - by fitting 100K Ohm/806 Ohm external divider module (not supplied)
millivolts: 0 - 80mVDigital Input:
1x (Digital Input B, Open >500Ω, Closed <150Ω)Outputs:
1x Logic (SSR) 12Vdc or (by configuration) Digital Input (Open >500Ω, closed <150Ω)
2x Relay - Form A (normally open) (Min 100mA@12vdc, max 2A@264Vac resistive)Transmitter Power Supply:
24Vdc, >28mA <33mA, 264Vac double insulatedSupply Voltage:
100 to 240Vac, -15%, +10%, 48 to 62 Hz, max 6W Eurotherm 3200 Series Datasheet* Configured with iTools software and lead, not supplied.
These units are part of a wider range, see the whole range.