Old stock - special clearance price.The Omron E5CB is a low cost entry level PID temperature controller. It is ideal as an alarm unit or for heater temperature contol. The large 4 digit display shows the measured temperature in red and target temperature in green. Currently stocked in 4 models, there is a choice of sensor input, output and supply voltage.
The controller has a choice of 10 alarm modes which activate the alarm relay (2nd output), the alarm is non-latching. The Run/stop function allows the control of the main output to be stopped, this done a via a front panel button. The controller features protection functions to hide or prevent changes to settings, so a supervisor can prevent operators from accessing functions such as Setpoint, Auto-tuning and Run/stop. The temperature input can be shifted to offset temperature sensor errors.
The E5CB doesn't support Type N thermocouples and the setpoint limits are defined by the sensor input range, if these features are needed consider the
Omron E5CC.
- Large bright display (16mm high for Process Value)
- Short depth behind the panel - only 60mm!
- 1 Output & 1 Alarm Relay
- PID (with auto-tuning) or On/Off Control
- IP66 Front Panel Water & Dust Protection
Sensor Input: Thermocouple Model: Type K, J, T, R, or S Thermocouples
Outputs: Relay Model: 1x SPST-NO Relay (250Vac, 3A), 1x SPST-NO Relay (250Vac, 1A)
Supply Voltage: 24Vac/dc Model: 24 Vac (+10% -15%) 50/60 Hz, or 24 Vdc (+10% -15%)
IP Rating: IP66 (Front Panel)
Dimensions: 48x48x65mm (WxHxD)
Depth Behind Panel: 60mm
View the Omron E5CB Brochure View the Omron E5CB Specification 
TMS Europe Ltd is a UKAS accredited calibration laboratory No.0461, as defined in our Schedule of Accreditation. As a UK manufacturer we're a member of Made in Britain.