The Eurotherm 32h8i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using a relay output.
The emphasis is on simplicity and ease of use. A simple 'QuickStart' code can be used to configure all the essential functions, including input sensor type, measurement range, control options and alarms - making 'Out of the Box' operation truly achievable.
The indicator can have up to 4 software alarms, which include absolute high & low and rate of change (rising or falling), that are auto or manual latching, non-latching or event only, and up to four conditions can be assigned to one output.
The Digital Input can function as alarm acknowledge, keylock, alarm inhibit, freeze display.
- 5 digit display
- Colour changing display (Upper display: Red, Green, or change during alarm)
- Quick and easy commissioning.
- Easy, comprehensive operator information.
- 4 Software Alarms.
- IP65 (NEMA 4X) rated front panel.
- Scrolling text messages (via iTools PC software and lead, not included)
Thermocouple, RTD, millivolts (Optionally: Linear milliamps, Linear volts, with adaptors, not included)
Thermocouple: Type B, C, J, K, L, N, R, S, T
RTD: 2 or 3-wire PT100
millivolts: 0 - 80mV Optionally: Linear milliamps: 0 - 20mA, 4 -20mA with 2.49 Ohm external shunt (not included)
Optionally: Linear Volts: 0 - 10V with 100K Ohm/806 Ohm external divider module (not included)Digital Input:
1x, Open >500Ω, closed <150Ω, for logic/contact signal. (Additional Digital Input optional.)Outputs:
1x Change-over Relay - Form C (normally open & normally closed) (Min 100mA@12vdc, max 2A@264Vac resistive). (Additional change-over relay optional extra.)Transmitter Power Supply:
24Vdc, >28mA <33mA, 264Vac double insulatedSupply Voltage:
100 to 240Vac, -15%, +10%, 48 to 62 Hz, max 6WDimensions (Overall):
96 x 48 x 101mm (WxHxD)Depth behind panel:
1/8 DIN horizontal, 92 x 45mm (WxH) panel cut-outOther models are also available, with options including: low voltage supply, analogue retransmission, RS-485 etc digital comms, strain gauge input, FM Alarm standard compliance. Please contact us for a price.Appearance may vary from image shown.
These units are part of a wider range, see the whole range.