| InstCube66OTP-1P-16A | Single Phase, 230V, 16A (blue). | £530 |
| InstCube66OTP-1P-32A | Single Phase, 230V, 32A (blue). | £580 |
| InstCube66OTP-3P-16A | 3-Phase with neutral, 16A (red). | £580 |
| InstCube66OTP-3P-32A | 3-Phase with neutral, 32A (red). | £640 |
The InstCube66 OTP series offers a compact yet robust IP40 rated metal body and is design for use with higher powered thermal equipment fitted with a standard industrial mains plug.
Many laboratory ovens, furnaces and incubators that are left unattended overnight are not fitted with over-temperature protection as standard. This is a potentially dangerous Health and Safety risk. Retrofitting by the manufacturer is expensive and takes the unit out of commission while the work is done.
The answer is "InstCube". The wall-mounted unit, fitted with a Omron digital indicating controller and contactor, is a self-contained over-temperature control unit, which just plugs into your existing system. No wiring, no fuss.
Fitted with a round industrial plug and controlled output socket in which to plug the furnace, oven or incubator to be protected. It comes complete with a Type K thermocouple (3mm diameter, 300mm long plus 2 metres of lead) to put into your process, covering the range 0 to 1100°C. (Or other options are also availlable.)
The unit has a loud audible buzzer alarm that can be configured independently of the output alarm or disable.
The controller displays the current temperature measured by the thermocouple to 0.1 or 1° resolution. The unit can be configured to 'latch' if thermocouple input temperature goes above the controller's alarm value (the alarm will need to be acknowledged by the user before power is restored to the connected load) or to restore the power once the thermocouple input temperature goes below the controller's alarm value.
- Type K 2-pin universal plug input for thermocouples (preconfigured as -20.0 - 500.0°C)
- °C or °F display
- Audible Buzzer Alarm
- Red indicator shows when process is over-temperature
Sensor Input: Supplied with a Type K thermocouple.
Resolution: 0.1° (0.0 - 500.0°C) or 1° (-200 - 1300°C)
Output (depending on model): IEC 60309 socket.
Buzzer: 80dBA, Pulse
Supply Voltage (depending on model): 230Vac or 415Vac ( ±10%), 50Hz. Via IEC 60309 plug.
Dimensions: 160 x 160 x 110mm (W x H x D) without flanges
IP Rating: IP40
Additional options and bespoke builds are available on request, please contact us for details.
TMS Europe Ltd is a UKAS accredited calibration laboratory No.0461, as defined in our Schedule of Accreditation. As a UK manufacturer we're a member of Made in Britain.